Do you have a question about the Silvus StreamCaster SC4400 and is the answer not in the manual?
Discusses exposure to RF radiation and safe working distances from antennas.
Details RF power density limits and related standards for safe exposure.
Details the pin configurations for the SC4400E Power/Ethernet/Serial connector.
Details the pin configurations for the SC4200E Power/Ethernet/Serial connector.
Details the pin configurations for the SC4400 Power/Ethernet/Serial and PS/2 connectors.
Details the pin configurations for the SC4200 Power/Ethernet/Serial and PS/2 connectors.
Details the pin configurations for the SC3822 Power/Ethernet/Serial and PS/2 connectors.
Details the pin configurations for SC3500/SC3800 Power, Serial/GPS, and Ethernet connectors.
Outlines performance metrics like latency, sensitivity, and frequency bands for SC4400E.
Enables or disables encryption, sets encryption profiles, and configures HTTPS access.
Enables FIPS mode for regulatory compliance, requiring reboot and security resets.
Restores default settings or zeroes security parameters to their factory defaults.
Manages SSH login keys, SSH host keys, and HTTPS certificates for secure access.
Visualizes the mesh network topology, showing link health and node connections.
Allows users to send test traffic between nodes using the iPerf feature.
Steps to enable FIPS mode, requiring security resets and key management.
Extends mesh functionality over LAN, enabling multiple radios to connect to a LAN.
Extends mesh network over Internet links, connecting geographically separate sites seamlessly.
Guides on installing custom frequency plans via the web interface or a hidden page.
Provides step-by-step instructions for running iPerf tests between radios via terminal commands.
Emphasizes the importance of saving configurations and waiting for confirmation to prevent data loss.
Addresses issues related to LED status indicators, providing steps for resolution.
Guides on resolving intermittent link problems by checking link distance and interference.