To Next Page
P
pamelacolemanAug 11, 2025
Why DIGITAL EFFECTS do not work on Sima SFX-10 Mixer?
- CcynthiablanchardAug 11, 2025
If the digital effects on your Sima Mixer aren't working, make sure the effects are turned on by pressing the EFFECTS On button.
Why DIGITAL EFFECTS do not work on Sima SFX-10 Mixer?
If the digital effects on your Sima Mixer aren't working, make sure the effects are turned on by pressing the EFFECTS On button.
What to do if there is no audio on the output from Sima Mixer?
If you're not getting any audio on the output of your Sima Mixer, check that the audio mixer slides aren't set to the minimum levels. Adjust the slide to an appropriate setting.
Why is there no picture or audio on the output TV monitor from Sima SFX-10?
If there's no picture or audio on your output TV monitor when using the Sima Mixer, ensure the AC adapter is properly connected to the mixer and plugged into a working outlet. Also, verify that your recording VCR is switched to LINE or AUX input. Please refer to your VCR manual to ensure that the VCR output is switched to VCR or the TV is switched to channel 3 or 4. Check that Input Source A is in PLAY mode.
What to do if video output is rolling on Sima SFX-10?
If the video output from your Sima Mixer is rolling, the unit might be set to the wrong video standard. Set it to NTSC (USA) as described on page 23.
How to fix LEDs that do not light up on Sima SFX-10?
If the LEDs on your Sima Mixer do not light up when you turn on the power, it could be that the AC adapter isn't properly connected to the mixer or isn't plugged into a working outlet. Make sure the adapter cable is securely attached to the mixer and try plugging it into a different AC outlet.
General| Type | Analog |
|---|---|
| Channels | 10 |
| EQ Bands | 3-band |
| Phantom Power | Yes |
| Weight | 3.2 kg (7 lbs) |