EasyManua.ls Logo

SIMAG SDE Series - Cleaning Specific Parts

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
F08 F09
1
2
C
M
T
TP
F07
Clean the front or side “D” air vents with a
soft bristle brush or vacuum cleaner.
F08
Remove air lter “C” (if present), wash it with
warm water and soap, rinse it thoroughly and
reposition it only after it has completely dried.
F09
Depending on the model, remove the spring
“M” and the silicone cap “T” or the cap “TP”
of the water circuit (if present); wash the latter with soap
and water, taking care to remove all the accumulated
limescale, using a sponge if necessary. When cleaning
has been completed, rinse it with running water and put
it back in its seat locking it with spring “M” (if present).
Clean the control panel and the door with a soft cloth
slightly moistened with a neutral detergent suitable
for delicate surfaces. For how to use it, refer to the
instructions provided by the manufacturer of the chosen
detergent.
EVERY 6 MONTHS / 1 YEAR
Contact the ocial local Dealer/Distributor for washing,
descaling and sanitizing the water circuit.
EVERY YEAR
Contact your ocial local Dealer/Distributor for the
annual maintenance plan.
Proper and timely maintenance is essential to
ensure health safety and maintain excellent
performance of the appliance over time.
Filter "C" is present only
in air-cooled appliances

Related product manuals