SIMAG SDE Series - Troubleshooting and Contact

15
SIMAG Via Pascoli 22, 20005 Pogliano Milanese (MI) - Milano - Italy
Problems and solutions
PROBLEM SOLUTION
The appliance does not
switch on
• Check that there is no black-out, that the main switch of the dedicated panel has
not blown and that the plug is correctly inserted in the socket.
If none of these solutions solves the problem, contact Technical Assistance.
The appliance makes no
ice cubes or production
is limited.
• Make sure that the appliance is not near another very hot one (for instance an oven).
• Check that ambient temperatures do not exceed 43°C.
• Check that the supply water tap is open (see
F05
on page 10).
• Check that air filter “C” (if present) is not clogged, if necessary clean it (see
F08
on page 13).
• Check that front or side air vents “D” are not obstructed by objects or dust (see
F07
on page 12). Switch the appliance o and back on,
If none of these solutions solves the problem, contact Technical Assistance.
The appliance makes
imperfect cubes
• Check that the inlet water pressure is between 1 Bar and 5 Bar.
• Check the water system for obstructions.
If none of these solutions solves the problem, contact Technical Assistance.
The appliance is very
noisy
• Check the appliance touches no other apparatus, object or machine.
• Check the appliance is perfectly level.
• Check that all visible screws are properly tightened.
If none of these solutions solves the problem, contact Technical Assistance.
EU DECLARATION OF CONFORMITY
2011/65/EU; 2014/30/EU; 2014/35/EU;
We
declare under our responsibility that the product:
FABBRICATORE DI GHIACCIO
SDE 18 A | SDE 18 W | SDE 24 A | SDE 24 W | SDE 30 A | SDE 30 W | SDE 34 A | SDE 34 W | SDE 40 A | SDE 40 W | SDE 50
A SDE 50 W | SDE 64 A | SDE 64 W | SDE 84 A | SDE 84 W | SDE 100 A | SDE 100 W | SDE 170 A | SDE 170 W | SDE 220 A |
SDE 220 W
SDH 18 A | SDH 24 A | SDH 30 A | SDH 40 A | SDH 50 A | SDH 64 A
To which this declaration refers, is in compliance with Directives:
• 2011/65/EU “RoHS”;
and the following standards or other regulatory documents:
EN 60335-1 (2012) + A11 (2012) + AC (2014) + A13 (2017); EN 60335-2-24 (2010); EN 55014-1 (2006) + A1 (2009) +
A2 (2011); EN 55014-2 (1997) + A1 (2001) + A2 (2008); EN 61000-3-2 (2006) + A1 (2009) + A2 (2009); EN 61000-3-3
(2008); EN 61000-4-2 (2009); EN 61000-4-3 (2006) + A1 (2008) + A2 (2010); EN 61000-4-4 (2012)2; EN 61000-4-5
(2006); EN 61000-4-6 (2009); EN 61000-4-11 (2004); EN 62233 (2008)
POGLIANO MILANESE SIMAG
29/03/2022 ing. T. Vania
Technical Director