SIMAG SDE Series - Ice Cube Production

9
F04
2
5
ON
ON
1
ON / I
OFF / 0
4
6
3
start of the ice cube production cycle
water lling
cube size adjustment (if present)
stop of the ice cube production cycle
F04
Ice cube production start
3
To improve the appearance of the cubes produced, some appliances have the option of making adjustments
based on the temperature of the room in which the appliance is located via an evaporator thermostat.
If present, turn the knob:
- to the right if the cube is empty.
- to the left if the cube is too full.
When the room temperature varies (for example when the seasons change), it may be necessary to turn the knob again.
4
Press the ON/OFF switch (if present in your model). In models without the ON/OFF switch, no operation is
required.
5
The appliance starts loading water automatically. After about 5 minutes (the time varies depending on the
model) loading is completed and the ice cube production cycle starts.