Need help?Do you have a question about the Sime 1R and is the answer not in the manual?
Overview of the freestanding boiler series, its compliance with CEE Directive, and efficient performance.
Provides detailed diagrams and measurements for the 1R and 2R boiler models.
Lists key technical specifications, performance data, and operational parameters for the boiler models.
Presents graphical data illustrating pressure loss curves for different boiler models based on flow rate.
Details the dimensions of the direct passage combustion chamber for 1R and 2R models with diagrams.
Lists compatible ECOFLAM and RIELLO burners for various 1R and 2R boiler models.
Outlines the required characteristics for the boiler room according to liquid fuel heating system standards.
Specifies the necessary clearances around the boiler body for installation and ventilation.
Details procedures for connecting the water supply and filling the heating system correctly.
Explains the importance and requirements for installing the flue system for optimal boiler performance.
Describes the process for assembling the boiler body, especially if supplied in separate sections.
Provides step-by-step instructions for fitting the boiler's external casing and control panel.
Details the electrical connection requirements, including power supply and wiring for thermostats and the burner.
Lists essential checks and recommendations before the initial start-up of the boiler.
Guides users through the process of lighting the boiler and setting operational parameters for efficient use.
Explains the procedure for cleaning the boiler and flue pipes at the end of each heating season.
Provides critical safety warnings and advice on contacting authorized personnel for repairs.
To Next Page
General