Sime 1R - 1.5 Combustion Chamber Dimensions; 1.6 Compatible Burner Brands

22
1.5 COMBUSTION CHAMBER
DIMENSIONS
The dimensions of this direct passage
combustion chamber are reported in
fig. 3.
The refractory brick is supplied on the
“1R4” models.
Fig. 3
1R4 1R5 1R6 1R7 1R8 1R9
A mm 310 310 310 310 310 310
B mm 310 310 310 310 310 310
L mm 296 372 448 524 600 676
Volume m
3
0,025271 0,031891 0,038510 0,045129 0,051748 0,058367
2R6 2R7 2R8 2R9 2R10 2R11 2R12 2R13 2R14 2R15
A mm 390 390 390 390 390 390 390 390 390 390
B mm 430 430 430 430 430 430 430 430 430 430
L mm 570 670 770 870 970 1.070 1.170 1.270 1.370 1.470
Volume m
3
0,081690 0,096314 0,110938 0,125562 0,140186 0,154810 0,169434 0,184058 0,198682 0,213306
1.6 COMPATIBLE BURNER BRANDS
In general, the oil burner that is compatible with the boiler should use full spray nozzles.
1.6.1 ECOFLAM burners
1.6.2 RIELLO burners
Boiler Model Atomising
Gulliver R. 40 REG angle
1R4 RG1R - RG1 - RG1RK G5R - G5 - G5RK REG 5 60°
1R5 RG2 - RG2D R. 40 G10 REG 5 60°
1R6 RG2 - RG2D R. 40 G10 – 60°
1R7 RG2 - RG2D R. 40 G10 – 60°
1R8 RG2 - RG2D R. 40 G10 – 60°
1R9 RG2 - RG2D - RG3 - RG3D R. 40 G10 - R. 40 G20 – 60°
2R6 RG3 - RG3D R. 40 G20 – 60°
2R7 RG3 - RG3D R. 40 G20 – 60°
2R8 RG3 - RG3D R. 40 G20 – 60°
2R9 RG3 - RG3D R. 40 G20 - G20D – 60°
2R10 RG4S - RG4D R. 40 G20 - G20D – 60°
2R11 RG4S - RG4D R. 40 G20 - G20D – 60°
2R12 RG5D - RL28 - RL28/1 – – 60°
2R13 RG5D - RL28 - RL28/2 – – 60°
2R14 RG5D - RL28 - RL28/3 – – 60°
2R15 RL28 - RL28/4 – – 60°
Boiler Model Atomising
1 flame 2 flames angle
1R4 MINOR 4 – 60°
1R5 MINOR 8 – 60°
1R6 MINOR 8 – 60°
1R7 MINOR 8 – 60°
1R8 MINOR 12 – 60°
1R9 MINOR 12 – 60°
Boiler Model Atomising
1 flame 2 flames angle
2R6 MAIOR P 15 MAIOR P 15 AB 60°
2R7 MAIOR P 15 MAIOR P 15 AB 60°
2R8 MAIOR P 15 MAIOR P 15 AB 60°
2R9 MAIOR P 25 MAIOR P 25 AB 60°
2R10 MAIOR P 25 MAIOR P 25 AB 60°
2R11 MAIOR P 25 MAIOR P 25 AB 60°
2R12 MAIOR P 25 MAIOR P 25 AB 60°
2R13 MAIOR P 35 MAIOR P 35 AB 60°
2R14 MAIOR P 35 MAIOR P 35 AB 60°
2R15 – MAIOR P 45 AB 60°