EasyManua.ls Logo

Sime FORMAT 34I BF User Manual

Sime FORMAT 34I BF
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Format
34I-34E BF
AUS
Question and Answer IconNeed help?

Do you have a question about the Sime FORMAT 34I BF and is the answer not in the manual?

Sime FORMAT 34I BF Specifications

General IconGeneral
BrandSime
ModelFORMAT 34I BF
CategoryBoiler
LanguageEnglish

Summary

2 GENERAL REQUIREMENTS FOR INSTALLATION

2.5 ELECTRICITY SUPPLY

2.8 D.H.W. SYSTEMS

3 INSTALLING THE BOILER

3.1 FIXING THE WALL MOUNTING BRACKET

Step-by-step instructions for securely mounting the boiler bracket to the wall.

3.2 HANGING THE BOILER

Procedure for lifting and positioning the boiler onto the wall mounting bracket.

3.3 FLUE DUCTS MODEL "341 BF"

Details on flue kit, extensions, curves, and maximum lengths for 341 BF.

3.6 SAFETY VALVE CONNECTION

3.7 WIRING INSTRUCTIONS

Steps for disconnecting power and accessing the control panel for wiring work.

4 COMMISSIONING AND TESTING

4.1 FILLING THE WATER SYSTEM

Procedure for filling the boiler and heating system with water and venting air.

4.2 COMMISSIONING THE BOILER

Steps to check burner pressure and ensure correct operation after installation.

4.3 SETTING THE C.H. INPUT

Instructions for adjusting the central heating input and checking burner performance.

4.4 SETTING THE D.H.W. FLOWRATE

Procedure for setting the domestic hot water flow rate for optimal temperature.

4.5 FINAL CHECKS

4.6 USER'S INSTRUCTIONS

Guidance for installers on explaining operation, safety, and maintenance to the householder.

5 ROUTINE SERVICING INSTRUCTIONS

5.3 HEAT EXCHANGER

5.8 CLEANING THE C.H. WATER FILTER

6 FAULT FINDING

6.1 EARTH CONTINUITY CHECK

Procedure for checking earth continuity of the appliance's electrical system.

6.2 SHORT CIRCUIT CHECK

Steps to diagnose short circuits in the appliance's wiring.

6.3 POLARITY CHECK

Procedure for verifying correct polarity of the mains supply connection.

6.4 RESISTANCE TO EARTH CHECK

Method for checking resistance to earth for electrical safety.

6.5 FAULT FINDING LEDS

Explanation of indicator LEDs for diagnosing appliance faults.

6.6 C.H. MODE - FAULT FINDING

6.7 D.H.W. MODE - FAULT FINDING

7 WIRING & FUNCTIONAL DIAGRAMS

7.1 ILLUSTRATED FLOW WIRING DIAGRAM

Detailed wiring diagram illustrating the flow of electrical connections within the boiler.

8 REPLACEMENT OF PARTS

8.1 HEAT EXCHANGER

Step-by-step guide for removing and replacing the heat exchanger.

8.3 FAN ASSEMBLY

Instructions for removing and refitting the fan assembly.

8.4 MAIN BURNER

Procedure for replacing the main burner assembly.

8.5 IGNITION/DETECTION ELECTRODE

Guide to replacing the ignition and detection electrode.

8.6 GAS VALVE

Instructions for replacing the gas valve and setting burner pressures.

8.7 AIR PRESSURE SWITCH

8.13 DIVERTOR VALVE - COMPLETE

Related product manuals