EasyManua.ls Logo

Sime FORMAT DGT 30e User Manual

Sime FORMAT DGT 30e
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FORMAT DGT
30i & 30e
CENTRAL HEATING BOILER
Installation, User and Service
Instructions
AGA CERTIFICATION No. 7670
AUS
WARNING
The installation of this product must be carried out
only by authorised personnel to the requirements of
Australian Standard AS 5601, local authority, gas, elec-
tricity and any other relevant statutory regulation.

Table of Contents

Other manuals for Sime FORMAT DGT 30e

Question and Answer IconNeed help?

Do you have a question about the Sime FORMAT DGT 30e and is the answer not in the manual?

Sime FORMAT DGT 30e Specifications

General IconGeneral
BrandSime
ModelFORMAT DGT 30e
CategoryBoiler
LanguageEnglish

Summary

Sime Central Heating Boilers Warranty

Authorized Personnel Requirement

Emphasizes that installation and servicing require authorized personnel only.

User Instructions

General Safety Warnings

Lists safety precautions for operation and use of the appliance.

Lighting and Operation Procedures

Explains how to unlock controls and perform initial boiler ignition.

Controls Operation

Anomalies and Solutions

User's Pre-Service Check List

Commissioning Boiler Check List

Installer Instructions

Use, Maintenance, and Fault Finding

Details boiler usage, maintenance schedules, and troubleshooting guides.

Description of the Boiler

Technical Features

Installation Guidelines

General Installation and Clearances

General installation, minimum clearances, and anti-freeze function.

Flues and Chimneys

Coaxial Duct Installation

Covers the installation of coaxial ducts, including accessories and maximum lengths.

Separate Ducts Installation

Provides guidance for installing separate air and exhaust ducts.

Flue 80/125 Co-Axial Details

Minimum Clearances for Flue Terminals

Terminal Position Clearances

Details minimum clearance requirements for various flue terminal positions.

Electrical Wiring

Grounding and Power Safety Precautions

Emphasizes grounding necessity and advises power isolation before work.

Remote Control CR 63 Connection

Thermostat/Control Unit Installation Note

Any thermostat or external control must be installed by an authorized person.

Boiler Characteristics

Control Panel Overview

Explains the icons, controls, and LEDs on the boiler's control panel.

Access to Installer Parameters

Configuration Parameters

Covers fast configuration and D.H.W./heating settings.

Use and Maintenance

Gas Conversion Process

Outlines the steps for converting the boiler between natural gas and LPG.

New Fuel Configuration

Instructions for accessing parameters to configure the new fuel type after conversion.

Adjusting Gas Valve Pressure

Step-by-step guide for adjusting the gas valve's maximum and minimum pressure settings.

Dismantling the Casing

General Boiler Maintenance

Provides guidance on regular checks and cleaning for maintaining boiler efficiency.

Chimney Sweep Function

Central Heating Fault Finding

Related product manuals