10
OWNER’S MANUAL
DRUM MODULE OPERATION
TOP PANEL CONTROLS
1. Kit: Selects Kit mode
2. Song: Selects Song mode
3. Utility: Selects Utility mode
4. Edit: Selects Edit mode
5. Save/Enter: Confirms a value or saves Kit edits
6. Bluetooth: Enables Bluetooth MIDI pairing
7. Increment/Decrement buttons: Changes kits or songs, or
changes values in steps of one. If you press both + and -
together, it returns to the first kit or returns an edited
parameter to its default value.
8. Value knob: Changes the selected value on the screen
9. Function buttons: Select the function or menu listed on
the display just above them. In the manual, these are
referred to as F1 through F5.
10. LCD Display
11. Cursor buttons: Cursors between fields on menus
12. Exit: Used to exit a mode or screen
13. Faders: Changes the fader functions, as displayed by
the Fader Bank LED (19). Press and hold the Faders
button to reset all of their settings to default values.
14. Tempo – and +: Changes the sequencer tempo values
incrementally.
15. Rec: Records MIDI
16. Play/Stop: Starts and stops the selected song in
Song mode
17. Click: Turns on and off the metronome click.
18. Mute: Removes the drum part from song playback
19. Fader Bank LED: Shows which set of parameters can
be edited using the faders. Change this using the
FADERS button.
20. Faders: Adjust parameters like tuning and mix. Changes
are global for all kits until reset.
7 8 9 10
2019
11
12
13
2
1
4
5
6
14
15
16
18
17
3
To Next Page
Loading...
Need help?
General
