SD
OWNER’S MANUAL
26
The first name in electronic drums.
9993 Simmons SD1500 Drum Set Manual.indd 11_22_13 0913AM
Parameter Brief explain Range Default
Voc*
Voice applied for part1
~
part 5
detailed instructions below --
Volume Part volume 0
~
32 25
Reverb Part reverb 0
~
32 16
Pan Part pan L8
~
Center
~
R 8 Center
*Parameter Definitions
VOC: Each preset song has its default voice. The DATA indicator in the right bottom side of
the LCD display will show the number of the current voice.
Erasing Parts in a Song
This function is only available for User Songs. You cannot erase a part on a Preset Song.
If you want to modify a Preset Song first save it to a User memory location.
1. From the Song Mode press the [MENU] button.
2. Press the [PAGE +] button to select the Part screen (PART: DRUM usually comes up first).
3. Press the [PAGE +] button to go to the erase screen.
4. Press the [-/+] buttons or VALUE DIAL to select the part you want to erase (Drum, Percussion,
Parts 1-5 and All).
5. Press the [SAVE/ENTER] button to erase the part. You will see “Sure?” on the display.
6. Press the [SAVE/ENTER] button. You will see “Erase OK!”. The part should now be erased.
Advanced Operations
9993 Simmons SD1500 Drum Set Manual.indd 26 4/25/14 10:56 AM
To Next Page
Loading...
