SDM630 DMR TIER II – OPERATING INSTRUCTIONS
© SimocoGroup Australasia 2013 page 34 TNM-U-E-0108 Issue 1.1
4.2.12.12 Enter Unit ID Screen
This screen allows manual entry of the destination unit ID decimal digits. The valid range of
unit ID: (0 – 16,777,215).
The entered digits can be deleted by using the ▼ key.
The “
Menu
” or “
Back
” key returns to Destination Selection pop-up Menu screen.
A “Reset” function key press (if configured) takes the radio back to the default screen display.
Pressing “OK” sends the message to the entered unit ID (providing it is valid). The screen
will return to the default screen.
If the entered unit ID is not valid, an error beep will sound.
Sending a short message or text message can fail if the destination radio is not available.
To Next Page
Loading...
