Simoco SDM630 Series - Page 36

SDM630 DMR TIER II – OPERATING INSTRUCTIONS
© SimocoGroup Australasia 2013 page 36 TNM-U-E-0108 Issue 1.1
The pop-up selections are:
• Add: adds a channel to the scan group
•
Delete: deletes the currently selected channel from the scan group
• Back: returns to previous menu screen
The ▼ and ▲ keys make the selection.
The “Menu” or “Back” key takes the radio back to the “Scan Edit” main screen.
A “Reset” function key press (if configured) takes the radio back to the default screen
display.
If “Delete” is selected, pressing “OK” key removes the selected channel from the scan group
and takes the radio back to the default screen display. If scanning is enabled on the current
channel, this action shall result in rescanning. The deletion is permanent.
If “Add” is selected, pressing “OK” key takes the radio to the Scan Group Add Type screen.
The priority level of the channel to add to the scan group is selected from this screen. The
choices are:
• Member: A member channel is a normal channel with lowest priority in the scan
group.
• Prty1: A Priority 1 channel will have the highest priority in the scan group
• Prty2: A Priority 2 channel will have the second highest priority in the scan group.
The priority of the channel is selected using the ▼ and ▲ keys and pressing OK. The Scan
Group Add screen will appear next.