What to do if my Simond store PROPANE FORGE Burner has no flame?
If your Simond store Burner has no flame or a low flame, it might be due to a clogged burner orifice. To fix this, try cleaning the orifice. Alternatively, you can replace it with a new one.
Why is the temperature low on my Simond store PROPANE FORGE?
If you are experiencing a low temperature with your Simond store Burner, the burner orifice might be clogged. You can try cleaning the burner orifice, or replace it with a new one.
General| Brand | Simond store |
|---|---|
| Model | PROPANE FORGE |
| Category | Burner |
| Language | English |
Highlights risks associated with improper installation, adjustment, or operation.
Use the forge on a hard, level, non-combustible surface only in an outdoor safe area.
Wear fire retardant gloves, blacksmith tongs, leather apron, and goggles during operation.
Inspect propane cylinder, regulator, and burner; install regulator by hand until seated, then tighten.
Shut down by turning off fuel, disconnect cylinder, and allow forge to cool for at least 30 minutes.
Prepare the surface by placing refractory bricks, castable, or concrete for stable placement of the forge.
Connect the pre-assembled burner parts with the hose and gas pressure regulator using clamps.
Attach the burner system to the top of the forge using coupling and adjustable screws.
To Next Page
