Wireless Communication Locator Quick Start Guide
Focus on Precise Space-time, Assist in Smart Service Worldwide
The reply format is:
Latitude Longitude Date Time S1 Locator IMEI ICCID of the current SIM card
status code
The tens digit of the status code indicates the power shortage flag bit, and the ones digit indicates the current
Mode.
※ Due to the need of low power consumption,S1 locator will only wait for the server to issue instructions after
reporting the registration information
※ The data sent is in WGS-84 coordinate system, it is recommended to use Google Maps to view
1. Immediately reply to the
current location
2. Set the current mode interval
As shown above, set the current mode
reporting interval to 3 minutes and set the
interval to 1-1440 minutes
3. Restore the default interval of
the current mode
When CYC is set over 1440 minutes
The current mode reporting interval will revert to
the default frequency
To Next Page
Loading...