5-3
Selecting Points from the Menu
Procedure 1. Press the Menu key to enter the panels’s menu system.
2. Press the Next key until the alphanumeric display reads as follows:
3. Press ENTER. The display reads as follows:
4. Press the Next key to scroll through the categories of points until the appropriate category is
shown. Press the ENTER key. The first point in the selected category appears. In the example
below, the point shown is the first one in the monitor zone category.
5. Press the Next key to scroll through the list of points in the category. When the point that you
want to select is displayed, press ENTER.
To Next Page
Loading...
Need help?
General
