www.tksimplex.com
••• 5 •••
4.4 CONNECTING HYDRAULIC TOOLS OR CYLINDERS
Use only cylinders, tools, hoses and accessories rated at 10,000 PSI (700kg/cm
2
). When making connections with
quick disconnect couplings, make sure the couplings are fully engaged. Threaded connections such as ttings,
gauges, etc. must be securely tightened and leak free. Use 1.5 wraps of Teon tape (or suitable thread sealant) on all
threads, leaving the rst complete thread free of tape to ensure no foreign matter enters the hydraulic circuit.
4.5 PUMP MOUNTING Refer to the chart for mounting dimensions to secure the pump to a xed surface.
1.5 gal.(6L) 2.5 gal.(10L) 5 gal. (20L) 10 gal. (38L)
A
15.13 17 19.6 19.6
B
1.68 2.75 4.69 4.69
C
3.57 4.37 5.03 4.69
D
1.43 1.93 2.93 2.93
E
8.75 9.75 11.75 12.25
F
1/4-20unc
(4 places)
1/4-20unc
(4 places)
1/4-20unc
(4 places)
1/4-20unc
(4 places)
5.0 CONTROL VALVES
2-Way Valve for Single Acting Rams
• To Advance......turn lever to the right.
• To Hold......turn motor off and leave in advance position.
• To Retract......turn lever to the left.
3-Way Manual Valve for Single Acting Rams
• To Advance......push lever to the right.
• For Neutral/Hold......place lever in the middle.
• To Retract......push lever to the left.
3-Way Solenoid Valve for Single Acting Rams
• To Advance......depress the ▲ BUTTON.
• For Neutral/Hold......release the switch.
• To Retract......depress the ▼ BUTTON.
4-Way Manual Valve for Double Acting Rams
• To Advance......push lever to the right.
• For Neutral/Hold......place lever in the middle.
• To Retract......push lever to the left.
4-Way Solenoid Valve for Double Acting Rams
• To Advance......depress the ▲ BUTTON.
• For Neutral/Hold......release switch.
• To Retract......depress the ▼ BUTTON.
A
B
C
D
E
F
3 Way Solenoid Valve
4 Way Solenoid Valve
2 Way Manual
3 Way Manual
4 Way Manual