Simplex TrueSTART II - User Manual

TrueSTART II
Installation & Service
Instrument
To Te s t
IDNet/IDNAC
X-Talk
IDC
NAC
Green wire must be connected to earth when
conducting an earth fault test or search.
WARNING:Test the wire with voltimeter and
verify no external voltage source is present
before connecting this instrument.
Use up/down arrow and keys to move
between menu choices
To Navigate Menus
Press ENT ket to select a menu choice
Press MENU key to back out of a menu
choice
Connect
Red +, Black -
Red to CHNL1+
Green to CHNL2+
Red+, Black -
Red to Alarm-
Black to Alarm+
ON
OFF
ENT
MENU F1 F2
Main Menu
Press ENT to select
[Earth Fault Test]
R
579-1030 Rev A

Simplex TrueSTART II Specifications

General

Brand	Simplex
Model	TrueSTART II
Category	Test Equipment
Language	English

Summary

TrueSTART II Introduction

Power Sources

Lists the power sources available for the TSIT instrument.

Battery Operation

Instructions for installing and operating the TSIT using its battery.

AC Adapter

Aux Power Harness

Testing & Safety

Power-Up

Selecting a Test

Earth Fault Testing

IDNet Testing

Earth Fault Summary for IDNet

Specific steps and summaries for conducting earth fault tests on IDNet channels.

IDNet Connection Guide

Details on how to connect the TSIT for testing IDNet channels.

Performing the IDNet Test

Reviewing IDNet Test Results

How to interpret scan results, totals, addresses, and errors from IDNet tests.

Other IDNet Tests

IDNet Shorts Testing

IDNAC Testing

IDNAC Test Overview

Details on the IDNAC Detailed Scan test for device detection and configuration.

Reviewing IDNAC Test Results

How to navigate and interpret results from the IDNAC Detailed Scan.

Additional IDNAC Tests

IDNAC Power Option

X-Talk Testing Procedure

Troubleshooting X-Talk Failures

Testing IDC;Zone Circuits

IDC Test Result Interpretation

Testing NAC;Signal Circuits

Saving Test Results

Recalling Test Results

Uploading Test Data to PC

System Settings

Backlight Timer Configuration

How to configure the backlight timer for the TSIT display.

Battery Selection

Clearing TSIT Memory

Software Revision

Battery Charging Procedure

IDNet Device Types Reference

IDNet Device Types (Continued)

IDNet Error Messages Guide

IDNAC Device Types Reference

IDNAC Error Messages Guide

IDNAC Configuration Information

TrueSTART Data Analyzer Software

Installing the Data Analyzer Software

Step-by-step guide for installing the TrueSTART Data Analyzer software.

TrueSTART II Replacement Parts