14
stances, because this may cause a reduction in insulation performance. The
permanently connected test cables are double insulated. Inspect measurement
cables on a regular basis. Thoroughly inspect cables every 6 to 12 months.
Even if measuring cables are slightly damaged, send tester to factory for repair.
See paragraph 9.
8.4 Repair
Voltage conducting parts may be exposed when instrument is opened. Instru-
ment must be disconnected from measuring circuit before repair, replacement of
parts or calibration. If repair of an open, live instrument is unavoidable, instrument
must be repaired by trained personnel who are familiar with the risks involved.
10. TECHNICAL ASSISTANCE
SIMPSON ELECTRIC COMPANY offers assistance Monday thru Friday 8:00 am
to 4:30 pm Central Time. Contact Technical Support or Customer Service at (715)
588-3311.
!
w ww . . co m
information@itm.com1.800.561.8187
To Previous Page
Loading...
