Simpson Hawk 3 User Manual

5. DISPLAY AND KEYPAD CONTROLS
5.1 Operating the Keys
5.1.1 Run Mode
"
= Enters the Program Menu

= Displays the Maximum Value (if enabled). Press

and hold while pressing
to clear maximum value.

= Displays Minimum Value (if enabled). Press

and hold while pressing
to clear minimum value.
= Resets Latched Relays (If any).

and

= Sets Zero/Tare Value (if enabled). Also clears Minimum and Maxi mum values.
5.1.2 Program Mode
"
= Enters the Edit Mode. Flashing cursor shows value to edit (Numeric Val ues only).

= Scrolls “UP” through menu.

= Scrolls “DOWN” through menu.
= Selects a menu or submenu to edit.
5.1.3 Edit Mode
"
= Moves Edit Cursor to the left. Flashing cursor shows value to edit (Numeric Values Only).

= Increases Numeric Value or Scrolls “UP” through submenu.

= Decreases Numeric Value or Scrolls “DOWN” through submenu.
5.1.4 Reset to Factory Defaults
Simultaneously press
"
and

5.1.5 Password Reset
Simultaneously press

Numeric and Message
Alarm Status Indicators
Units Window
4-Button Keypad
RESET
ENTER
RESET
ENTER
RESET
ENTER
RESET
ENTER
RESET
ENTER
RESET
ENTER
17

Simpson Hawk 3 Specifications

General

Brand	Simpson
Model	Hawk 3
Category	Controller
Language	English