8
CARTON CONTENTS
ASSEMBLY INSTRUCTIONS
1) Locate and remove all loose parts from the carton.
2) Cut the four corners of the carton from top to bottom and lay the panels at.
3) Place the handle onto the frame, depress the snap buttons, and slide the handle assembly down
on the frame until snap buttons snap into place.
Risk of Personal Injury. Avoid placing hands between the handle and frame when
assembling to prevent pinching.
4) Connect Gun to Wand. Tighten Securely.
5) Attach high pressure hose to gun. Tighten securely.
6) Remove the colored quick connect nozzled from plastic bag and insert them into grommets on the
nozzle holder.
Engine Frame
and Wheel
Assembly
High Pressure Hose
Handle
Spray Gun
Spray Wand
Quick Connect
Nozzles
Nozzle
Cleaning
Tool
Engine
Manual
Operation
Manual
Bagged Parts
To Next Page
Loading...
