SimPure DB10 - Installation Guide

Installation Guide
Read the entire manual thoroughly before beginning your installation. Take
note of the safety tips and follow all steps to ensure your system is installed
correctly before use. Installation needs to comply with state and local laws and
regulations; you must check and comply with all local plumbing codes. Warning:
Massachusetts, USA, require installation by a licensed plumber. (plumbing code
248-CMR of the Commonwealth of Massachusetts)
Hand Tools Required
Ess
Housing. An electric drill and drill bits suitable for mounting the filter bracket
to the wall. Adjustable wrench, cross-head screwdriver (Phillips), Pipe cutter, or
hacksaw
ntial hand tools are needed to install the SimPure® DB Whole House Filter
Plan your Installation
SimPure® DB Water Filter Housing needs to be installed in a protected area
away from direct sunlight and frost on the incoming water supply pipe for your
property, like a basement or utility room.
9
Installation
System Contents
Your SimPure® DB Whole House Water Filter was carefully assembled,
packaged, and shipped, complete with all the parts you should require for a
standard installation.
Unsure about something? Is there a problem?
Please contact SimPure® through our website or toll-free number.
Customer Service: service@simpurelife.com
Phone: +1-866-528-4572
Website: www.simpurelife.com