To Next PageTo Next PageWhat to do if SimPure Water Filtration System will not turn on?
First, ensure the SimPure Water Filtration System is properly plugged into an electrical outlet and that the outlet switch is turned on, if there is one. You should hear two beeps when it connects to power. If it still doesn't turn on, try plugging it into a different electrical outlet to rule out an issue with the original outlet.
General| Brand | SimPure |
|---|---|
| Model | Y7 |
| Category | Water Filtration Systems |
| Language | English |
Lists all parts included with the purification system for setup and operation.
Highlights key characteristics like compact design and no plumbing required for ease of use.
Provides information on filter replacement status for CF and RO cartridges.
Indicates the system's filtering status and safety protection mode.
Details the flushing indicator light and its associated button functions.
Explains the operation and status of the UV purification light.
Indicates when the feed water tank needs attention or refilling.
Signals low levels in the internal pure water reservoir.
Lists part numbers and recommended replacement schedules for filter cartridges.
Provides instructions for cleaning the feed water tank strainer, sleeve, and check valves.
Information on available consumable items for system maintenance.
Details on test equipment and accessories to monitor system performance.
Overview of other SimPure® products designed to improve life.
