EasyManua.ls Logo

SimPure Membrane Solutions MS18 - Operating Guidelines and Parameters

SimPure Membrane Solutions MS18
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting Guide
Problem
Possible Solution
1
The air puri�ier
will not turn on or
respond to the
power button
Plug the air puriier into an electrical
outlet and make sure the outlet is
switched on (if applicable).
Plug the air puriier power adaptor into a
different electrical outlet.
2
Air�low is
signiicantly
reduced
Make sure the ilter has the packaging
removed (see page 9)
Press the fan button to increase fan
speed
The ilter may be blocked, replace the air
ilter
3
Air Puri�ier makes
unusual noise
while the fan is on
Make sure the air puriier is being
operated on a hard-lat even surface
The ilter may be blocked, replace the air
ilter
The air puriier may be damaged
contacted customer support
4
Unpleasant or
mustysmell coming
from the puriier
Do not use in a damp or wet environment,
If air �ilter becomes damp, replace the
ilter and move the air puriier unit to a
dry area
The carbon component of the ilter may be
exhausted, replace air �ilter.
5
Poor air
puri�ication quality
Press the fan button to increase fan
speed
Close doors and windows while using the
air puriier
Make sure the ilter has the packaging
removed (see page 9)
Replace ilter
Operating Guidelines
The following table lists the operating parameters for this product.
Operating this product outside these speci�ications may cause system
performance issues and may even lead to personal injury and void any
warranty. Please contact Membrane Solutions
®
for further advice and
support.
Operating Parameters
Model
Membrane Solutions
®
MS18
Rated Voltage
120 V ~ 60 Hz
Rated Power
81 Watts
Clean air delivery rate
(CADR)
110 CFM
(187 m
3
/h)
Noise level
59 dB (A)
Dimensions
9.4 x 7 x 20.2 Inches
(240 x 178 x 512 mm)
Operational weight
7.9 Ib (3.6 kg)
Filter Element type
A single composite ilter element
Temperature & Humidity
Operating: 32-104 (0-40℃) 20-90%
Storage: 14-140 (-10-60℃) 20-90%
The above performance index data is obtained in a third-party
laboratory according to the international ANSI/AHAM AC-1-2006,
with speci�ic smoke particles or gaseous pollutants as the target
pollutants.
11 4

Related product manuals