To Next PageTo Next PageWhy is the airflow significantly reduced in my SimPure Air Cleaner?
If you observe a significant reduction in airflow from your SimPure Air Cleaner, ensure that the filter packaging has been removed. Increase the fan speed by pressing the fan speed button. If the problem persists, the air filter may be blocked and require replacement.
Why is the filter indicator lamp on my SimPure Air Cleaner on?
The filter indicator lamp illuminates when the air filter is 100% exhausted and needs to be replaced.
General| Product Type | Air Purifier |
|---|---|
| Model | HP8 |
| Filtration | 99.97% of particles as small as 0.3 microns |
| Fan Speeds | 3 |
| Auto Mode | Yes |
| Sleep Mode | Yes |
| Filter Type | HEPA |
| Filter Technology | 3-Stage Filtration |
| CADR | 204 m³/h |
| Noise Level | ≤50 dB |
| Voltage | 120V |
| Timer | Yes (1-12 hours) |
Covers initial setup, introduction, system features, contact, safety, warnings, and operating guidelines.
Details system contents, connecting the purifier, and turning it on for initial use.
Explains how to operate the purifier, including modes, filter replacement, and troubleshooting.
Lists all parts and provides steps for connecting and turning on the purifier.
Overview of the control panel, including power, fan speed, sleep mode, and timer functions.
Guide on how to reset the filter indicator light after filter replacement.
Detailed steps for removing the old filter and installing a new one, including reset.
Identifies the specific part number for the replacement composite filter element.
Instructions on how to register your product's warranty online.
Information on available consumable items and tools for maintaining the air purifier.
Overview of other SimPure® products for water and air purification.
