Operating Guide
Control Panel
Power Button
Press the Power button to put air puri�ier
into operating mode.
Press the power button a second time to stop
the air puri�ier and place it into standby
mode.
Fan Speed
Press Fan button repeatedly to cycle through the
different speed settings.
Sleep – Low speed
2 – Medium speed
3 – High Speed
The corresponding fan speed indicator
light will display the current fan speed.
Sleep mode
Press the sleep button to put the unit into
Sleep Mode. In this mode the fan is at its
lowest/quietest setting. Also, only the Sleep
and Power buttons are illuminated to help
keep the room dark.
Timer
Press the timer button to set timed auto off
feature. Unit can be set run between 1 and 8
hours. Continue to press the timer button to
cycle through the preselected times. The
corresponding duration will be represented by
the number of indicator lights illuminated.
Filter Reset
When the total run hours of the air puri�ier reach
2000 hours, the indicator will �lash to indicate the
�ilter needs to be replaced. (See page. 9). After
the replacement is completed, press and hold the
�ilter button for 3 seconds until the indicator light
is off, the �ilter timer function is now reset.
7
8
Lock
To lock the system, press and hold the lock
button for 3 seconds until the lock display
is illuminated.
To unlock the system, press and hold the lock
button until the indicator light turns off.
Light
Turbo mode
To turn off all the unit's lights, press the light
button. Only the light button will remain
illuminated for easy identi�ication at night.
Press the Turbo button to set the unit at its
highest fan setting. The Turbo indicators light
will be illuminated.
To Next Page
Loading...
