SimPure Q3-600 - Installation Guide and Compliance; Installation Compliance with Regulations

Installation Kit
Carefully unpack your SimPure® Q3-600 Water Filtration System. Layout the
parts, so you can familiarize yourself with the components, check nothing is
missing before starting the installation.
Description
Main body
Gooseneck faucet
Power adapter
Drain saddle
Tubing ¢’ PE_(White, 59 inches)
Tubing ¢’ PE_(Blue, 59 inches)
Tubing /4’ PE (Red, 59 inches)
Feedwater valve % "
2l=z|o|=|m|o|o|=|>
Spare parts kit
%" male comp. x %" female NPT convertor fitting
1" male NPT x %" female comp. convertor fitting
3" Card pin (x3)
14" Card pin (x3)
Faucet adaptor 3/8"x1/4" tube QC
Teflon tape (roll)
O-rings for filter cartridges (x6)
Installation Guide
Read the entire manual thoroughly before beginning the installation. Take
note of the safety tips and follow all steps to ensure your system is installed
correctly before use. Installation needs to comply with state and local laws and
regulations; It is required to check and comply with all local plumbing codes.
Warning: Massachusetts, requires installation by a licensed plumber and does not
permit the use of saddle valves. (plumbing code 248-CMR of the Commonwea)
of Massachusetts)