RD68 RADIO CONFIGURATION PROGRAM
---------------------------------------------------------
Using COM1 port on computer NVM Data: LOADED
Software: 0.4
Select option:-
1 - Load NVM data from Radio
2 - Load NVM data from File
3 - View/Modify NVM data
4 - Save NVM data to Radio
5 - Save NVM data to File
6 - CLONE from existing Radio
7 – Exit Program
Use ↑↓ [Enter] or type option number, type [ESC] to exit program
Load NVM data from File
Enter NVM Data File Name:
NVM data
00: 10: 20: 30: 40: 50: 60: 70:
01: 11: 21: 31: 41: 51: 61: 71:
02: 12: 22: 32: 42: 52: 62: 72:
03: 13: 23: 33: 43: 53: 63: 73:
04: 14: 24: 34: 44: 54: 64: 74:
05: 15: 25: 35: 45: 55: 65: 75:
06: 16: 26: 36: 46: 56: 66: 76:
07: 17: 27: 37: 47: 57: 67: 77:
08: 18: 28: 38: 48: 58: 68: 78:
09: 19: 29: 39: 49: 59: 69: 79:
0A: 1A: 2A: 3A: 4A: 5A: 6A: 7A:
0B: 1B: 2B: 3B: 4B: 5B: 6B: 7B:
0C: 1C: 2C: 3C: 4C: 5C: 6C: 7C:
0D: 1D: 2D: 3D: 4D: 5D: 6D: 7D:
0E: 1E: 2E: 3E: 4E: 5E: 6E: 7E:
OF: 1F: 2F: 3F: 4F: 5F: 6F: 7F:
Enter file name {and path if required) or [ESC] to exit
To Next Page
Loading...
