Simrad RI35 Mk2 - Use of NMEA; Panel Mounting

Instruction manual
20220919D 11
3.2 Use of NMEA
The NMEA port on the RI35 Mk2 is unidirectional, i.e. it is
automatically configured for input (listening) or output (talking). The
listener port is also non-polarized.
For best performance, if the RI35 Mk2 is to be used with a non-
Simrad rudder feedback outputting NMEA data (RSA), 20Hz is
recommended. Max. 5 indicators (1+4).
FREQ SUPPLY
CURR
RF45X
RUDDER FEEDBACK
UNIT
RI35 Mk2
RUDDER ANGLE
INDICATOR
SUPPLY VOLTAGE 12/24VDC
RI35 Mk2
RUDDER ANGLE
INDICATOR
GREEN
RED
BLUE
+
+
+
FREQ SUPPLY
CURR
NMEA NMEA
RI35 Mk2
RUDDER ANGLE
INDICATOR
FREQ SUPPLY
CURR
NMEA
+
Figure 3-10 RI35 Mk2 – NMEA connection
3.3 Panel mounting
• Make a panel cut-out of 126 x 102
mm.
• Use the supplied fastening device to
secure the unit to the panel. See Figure
3-11.
Figure 3-11 RI35 Mk2 Panel mounting