Simrad RI35 Mk2 - Connections

Instruction manual
20220919D 5
3.1 Connections
Stand alone rudder angle indicator(s)
RF45X Rudder Feedback Unit (Current signal)
FREQ SUPPLY
CURR
RF45X
RUDDER FEEDBACK
UNIT
RI35 Mk2
RUDDER ANGLE
INDICATOR
SUPPLY VOLTAGE 12/24VDC
RI35 Mk2
RUDDER ANGLE
INDICATOR
GREEN
RED
BLUE
+
+
+
+
FREQ SUPPLYCURR
NMEA NMEA
Figure 3-1 RI35 Mk2 - RF45X Stand alone wiring diagram
Note ! If more than one indicator is needed, the other indicators must be
connected via the NMEA ports. Max. 5 indicators (1+4).
RF300 Rudder Feedback Unit
* Non polarized (colour independant)
FREQ SUPPLYCURR
RF300
RUDDER
FEEDBACK
UNIT
RI35 Mk2
RUDDER ANGLE
INDICATOR
RI35 Mk2
RUDDER ANGLE
INDICATOR
*
*
FREQ SUPPLYCURR
SUPPLY VOLTAGE: 12/24VDC
NMEANMEA
Figure 3-2 RI35 Mk2 – RF300 Stand alone wiring diagram
More indicators (max. 5) are connected in parallel.