Simrad RS90 User Manual

26 |
Getting started | RS90 Operating Manual
Special channel A/B
Certain USA channels have ‘A’ or ‘B’ suffixes.
“A” indicates simplex use of the ship station transmit side of an
international duplex channel, and that operations are different than
international operations on that channel. “A” channels are generally
only used in the United States, and use is normally not recognized
or allowed outside the U.S. “B” indicates simplex use of the coast
station transmit side of an international duplex channel. The U.S.
does not currently use “B” channels for simplex communications in
this band.
Adjusting the volume
The volume control on the right hand side of the handset provides
up and down control of the handset speaker volume and the
external speaker volume.
Adjusting squelch
The squelch adjustment allows you to adjust the sensitivity of
the radio so that background noise is minimized. In areas of high
static noise, such as close to large cities, you can improve quality of
reception by adjusting the squelch.
• Use the ◄ and ►keys to adjust the level up or down respectively.
• Adjust the level until the background noise just disappears.
¼ Notes:
• You can also adjust the sensitivity of the VHF receiver using the
Local/Distance setting. See “Radio sensitivity” on page 97.
• The ◄ and ►keys are also used for moving the cursor when
entering data on a wired handset.

Simrad RS90 Specifications

General

Brand	Simrad
Model	RS90
Category	Marine Radio
Language	English