EasyManuals Logo
Home>Simrad>Marine Radio>RS90

Simrad RS90 User Manual

Simrad RS90
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
| 21
Getting started | RS90 Operating Manual
Switching on and o
Switching on the system
The VHF radio is switched on from a wired handset.
To switch on the radio:
1. Press and hold [X] on a wired handset until the startup screen
showing version numbers appears.
2. When prompted, press [X] to exit the startup screen and display the
main operating screen.
This switches on the transceiver and the wired handset.
¼ Note: A wireless handset can only switch itself on and off. See
“Switching on a wireless handset” on page 22.
Switching o the system
The system is switched off by holding down the [X] key on a wired
handset until the display shows “Release the key to power off.
Just one handset
1. In standby mode, press [X] on the wired handset until the display
shows “Release key to power off.
2. Release the [X] key.
More than one wired handset
HS1 (handset 1) has a power-off menu. All the other handsets
simply power themselves off.
Handset 1 power-off menu:
• SYSTEM
Turns off all handsets and the transceiver.
• HS1
Turns off the handset itself.
Displays “SYSTEM IS WORKING” with no backlight.
¼ Note: You can ignore the power-off menu and keep holding down
[X] until the display shows “Release the key to power off.

Table of Contents

Other manuals for Simrad RS90

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad RS90 and is the answer not in the manual?

Simrad RS90 Specifications

General IconGeneral
BrandSimrad
ModelRS90
CategoryMarine Radio
LanguageEnglish

Related product manuals