Simrad RS90 - Ring Volume; Key Beep; Units

78 |
Setup | RS90 Operating Manual
Ring volume
The radio sounds a two-tone alert when it detects an incoming DSC
call. You can change the volume level.
1. Select MENU → RADIO SETUP → RING VOLUME.
2. Scroll to HIGH or LOW as required, then press [OK].
Key beep
You can change the key beep volume or turn the key beeps off
completely.
1. Select MENU → RADIO SETUP → KEY BEEP.
2. Scroll to the required setting: ON or OFF, then press [OK].
¼ Note: The key beep setting is separate for each handset.
Units
You can select your preferred measurement units for distance and
cross-track error (for waypoint navigation).
1. Select MENU → RADIO SETUP → UNITS.
2. Scroll to the required measurement units: METRIC, NAUTICAL or
STATUTE, then press [OK].
¼ Note: Nautical Miles is the only unit available in AIS mode.
RADIO SETUP
UIC
CH NAME
RING VOLUME
KEY BEEP
USA
16
Hi
DSC
PRI
RING VOLUME
HIGH
LOW
USA
16
Hi
DSC
PRI
RADIO SETUP
UIC
CH NAME
RING VOLUME
KEY BEEP
USA
16
Hi
DSC
PRI
KEY BEEP
ON
OFF
USA
16
Hi
DSC
PRI
RADIO SETUP
UNITS
EXT SPEAKER
WATCH MODE
USA
16
Hi
DSC
PRI
WX ALERT
UNITS
METRIC
NAUTICAL
STATUTE
USA
16
Hi
DSC
PRI