Simrad RS90 - Setting the Track Buddy Update Interval; Selecting a Buddy to Track

60 |
DSC Procedures | RS90 Operating Manual
Setting the track buddy update interval
You can set the interval at which the position requests are sent out.
1. Select DSC MENU → TRACK BUDDY.
2. Select INTERVAL.
3. Select the required interval: 15, 30 or 60 minutes.
4. Press [OK].
Selecting a buddy to track
1. Select DSC MENU → TRACK BUDDY.
2. Select SET BUDDY to show the tracking status of each buddy on
your tracking list.
3. Select the buddy whose status you want to change.
4. Select ON or OFF as required to change the tracking status and press
[OK] to confirm.
DSC CALL
DISTR LOG
SENT CALL
LL REQUEST
TRACK BUDD
USA
C
16
Hi
DSC
PRI
TRACK BUDDY
START TRACK
SET BUDDY
TRACKLIST
INTERVA L
USA
C
16
Hi
DSC
PRI
INTERVA L
15 MIN
30 MIN
1 HOUR
USA
C
16
Hi
DSC
PRI
DSC CALL
DISTR LOG
SENT CALL
LL REQUEST
TRACK BUDD
USA
C
16
Hi
DSC
PRI
TRACK BUDDY
START TRACK
SET BUDDY
TRACKLIST
INTERVA L
Lo
USA
A
C
16
Hi
DSC
PRI
SET BUDDY
BLUEBIRD
KITTIWAKE
USA
OFF
OFF
C
16
Hi
DSC
SET BUDDY
BLUEBIRD
ON
OFF
USA
C
16
Hi
DSC
PRI