Simrad RS90 User Manual

| 87
Setup | RS90 Operating Manual
Individual DSC call - reply options
The reply to an incoming DSC individual call can be automatic or
manual.
• An automatic reply sends an acknowledgement and then sets the
requested working channel, ready for a conversation.
• A manual reply prompts you to acknowledge the call.
1. Select MENU → DSC SETUP → INDIV REPLY.
2. Scroll to MANUAL or AUTO as required and press [OK].
For information on receiving an individual DSC call, see “Receiving a
DSC individual call” on page 65.
Enabling DSC functionality
Warning: DSC is an important safety function; disabling
it is not recommended.
DSC is only available after a valid USER MMSI has been entered. For
instructions on entering your MMSI, see “Entering or viewing your
individual MMSI” on page 84.
1. Select MENU → DSC SETUP → DSC FUNC.
2. Scroll to ON or OFF as required and press [OK]
¼ Notes
• It is not possible to have both ATIS and DSC on at the same time. If
you want to enable DSC, you must first switch ATIS off.
• When DSC functionality is selected, the
icon is displayed on
screen.
MENU SELECT
CONTRAST
GPS/DATA
RADIO SETUP
DSC SETUP
USA
C
16
Hi
DSC
PRI
DSC SETUP
USER MMSI
GROUP SETUP
INDIV REPLY
DSC FUNC
Lo
USA
C
16
Hi
DSC
PRI
INDIV REPLY
MANUAL
AUTO
USA
C
16
Hi
DSC
PRI
MENU SELECT
CONTRAST
GPS/DATA
RADIO SETUP
DSC SETUP
USA
C
16
Hi
DSC
PRI
DSC SETUP
USER MMSI
GROUP SETUP
INDIV REPLY
DSC FUNC
USA
C
16
Hi
DSC
PRI
DSC FUNC
ON
OFF
USA
C
16
Hi
DSC
PRI

Simrad RS90 Specifications

General

Brand	Simrad
Model	RS90
Category	Marine Radio
Language	English