Simrad RS90 User Manual

| 93
Setup | RS90 Operating Manual
Enabling the CPA alarm
You can enable or disable the CPA alarm.
1. Select MENU → AIS SETUP → CPA ALARM.
2. Scroll to ON or OFF as required, and then press [OK].
Setting up the T/CPA time
Time to closest point of approach (T/CPA) is the calculated time for a
target vessel to arrive at the closest point of approach based on the
current speed and course.
If the radio detects that a vessel will arrive at the closest point of
approach within the set time and the CPA distance, the CPA alarm
will sound a two-tone alert.
1. Select MENU → AIS SETUP → TCPA.
2. Use the ▲ and ▼ keys to raise or lower the T/CPA time limit.
3. Press [OK].
DSC
MENU SELECT
GPS/DATA
RADIO SETUP
DSC SETUP
AIS SETUP
USA
16
Hi
AIS SETUP
GPS REDIR
CPAALARM
CPA
TCPA
USA
CSD
16
Hi
DSC
AIS ALARM
OFF
ON
Hi
USA
A
16
DSC
MENU SELECT
GPS/DATA
RADIO SETUP
DSC SETUP
AIS SETUP
USA
16
Hi
AIS SETUP
GPS REDIR
CPA ALARM
CPA
TCPA
Lo
USA
CSD
16
Hi
TCPA
05:00Min
USA
CSD
16
Hi

Simrad RS90 Specifications

General

Brand	Simrad
Model	RS90
Category	Marine Radio
Language	English