Simrad RS90 - Position Display Options; Course and Speed Display Options; GPS Alert Options

96 |
Setup | RS90 Operating Manual
Position display options
You can display or hide your vessel’s position on screen.
1. Select MENU → GPS/DATA → SETTING → LL DISPLY.
2. Select ON or OFF as required.
Course and speed display options
If position and time are being updated through a GPS navigation
receiver, you can display or hide your course over ground (COG) and
speed over ground (SOG) data on screen.
1. Select MENU → GPS/DATA → SETTING → COG/SOG.
2. Select ON or OFF as required.
GPS alert options
If the GPS Alert setting is ON and no GPS signal is received for a
period of 10 minutes, the alarm will sound for 2 minutes.
1. Select MENU → GPS/DATA → SETTING → GPS ALERT.
2. Select ON or OFF as required.
¼ Note: The default setting is ON for the RS90 EU and OFF for the RS90
US.
GPS/DATA
MANUAL
SETTING
GPS SOURCE
USA
16
Hi
DSC
PRI
SETTING
TIME OFFSET
TIME FORMAT
TIME DISPLY
LL DISPLY
Lo
USA
16
Hi
DSC
PRI
GPS/DATA
MANUAL
SETTING
GPS SOURCE
USA
16
Hi
DSC
PRI
SETTING
COG/SOG
TIME FORMAT
TIME DISPLY
LL DISPLY
Lo
USA
16
Hi
DSC
PRI
GPS/DATA
MANUAL
SETTING
GPS SOURCE
USA
16
Hi
DSC
PRI
SETTING
COG/SOG
GPS ALERT
TIME DISPLY
LL DISPLY
Lo
USA
16
Hi
DSC
PRI