Weight
16
8. Enter Temperature
Insert thermometer probe into grain and note reading, (eq
21.0°C)
Press 2 2
Press 1 21
Pres’s 0 210
Press. TEMP 21.0
9. Press and hold %E
2
0 until analyzer 2
bleeps.
2
2
This completes the hardware resetting. Now check the
temperature., weight and capacitance.
b) Resetting the Weight Balance Only
As. the only moving part in the instrument, the weight
balance generally needs resetting more often than the other 2
sensors. For this reason there is .a quick procedure to reset
the weight balance only.
Ensure the cell is empty and hopper removed.
Display Shows
1. Switch on. — HI —
2.. Press and hold CAL
AUTO L ‘CAL.
3. Enter password
and press P 1 ~
I
To Next Page
Loading...