Version 2.0 13th May, 1993
CONTENTS
Page
I INTRODUCTION 1
II BASIC PRINCIPLE OF OPERATION 1
III OPERATING INSTRUCTIONS 2
111:1 Measuring % Moisture Content 2
111:2 Measuring Sample Temperature 4
111:3 Using the ‘Average’ Moisture
content facility 5
111:4 Measuring Hectolitre (Bushel) Weight 5
111:5 Using the Printer 6
IV CALIBRATION ADJUSTMENTS 10
IV:l % Moisture Content 10
IV:2 Hectolitre (Bushel) Weight 11
V CALIBRATION TRANSFERS 12
VI KARDWARE SECTION 14
VI:1 Set up Checks 14
VI:2 Changing Default settings 18
VI:3 Replacement of Batteries 20
VI:4 Changing the Password 20
VI:5 Routine Maintenance 21
VII SPECIFICATION 23
VIII MAIN PARTS ILLUSTRATION 25
IX CROSS SECTION OP SAMPLE CELL 26
APPENDIX I - Error Code Sunmiary 27
To Next Page
Loading...