Version 2.0 13th May, 1993
The performance of this Moisture Analyzer is dependent on the
correct use and instrument care by the customer. It is important
to check the calibration (both commodity and hardware)
periodically and, if necessary, make adjustments following the
procedure in this manual. The commodity calibration can be checked
by comparing the Moisture Analyzer results against reference
samples, e.g. oven tested samples (please ensure that tested
samples are based on the correct oven test specification).
If the hectolitre (bushel) weight facility is used, the results
should be checked against reference samples and if required the
readings can be adjusted following the procedure detailed in this
manual.
To Next Page
Loading...