Weight
19
Battery Low
The alkaline batteries in your Moisture Analyzer should
last for at least 8,000 readings or one years regular use.
Battery Low Indicator
Should the batteries begin to fail, a warning signal will
appear when the instrument is switched on:
I bitt
will continue to flash on and off for a few
seconds.
To Replace the Batteries
1. Remove the sample cell from the instrument.
2. Unscrew the battery cover from the underside of the
instrument.
3. Remove the old batteries and replace with
four standard l.5v alkaline batteries (Size
C, MN 1400 or equivalent). BE SURE TO
INSERT BATTERIES THE CORRECT WAY ROUND AS
MARKED IN THE BATTERY COMPARTMENT.
4. Replace the battery cover.
Important! Always use alkaline batteries for longer life and
better storage. If you are not going to use the moisture
analyzer for some time, remove the batteries from the
instrument.
VI:4 CHANGING THE PASSWORD
The password can be changed to prevent unauthorised
changes being made to the instrument.
When the instrument leaves the factory the password is
123.
To Next Page
Loading...