Weight
18
4. Press CAL AUTO
5. Press CAL
again
AUTO
I CO.PA 1
SEt
In this mode the following keys have specific functions:
— When thi.s key i.s hel.d down, the display changes from USA to Euro
or vice versa. In Euro units the readings are °C for temperature and
kg/hi for specific weight i.e. hectolitre weight. In USA units, the
readings are °F for temperature and lb/bu for specific weight, i.e.
bushel weight.
AVER - When this key i.s held down the baud
rate changes from 300 to 4800 or vice
versa.
— When this key is held down, the analyzer changes from high to low
frequency measurements or vice versa. It is always possible to say
what frequency is being used as soon as the analyzer in
switched on:
I_HI_
I
Iii
i~ I
- Low
Frequency
- High Frequency
High frequency moisture measurements improve the
performance of the analyzer at higher moisture
values, e.g. 20%+ for cereals. Please be aware that
unless specifically requested all SINARTM Th
calibrations are designated for low frequency
testing.
lb/b
u
kg/h
i
When this key is held down the
display changes from nor to l8Or or
vice versa. When 180r is displayed,
this fixes the sample weight that
will be used in the moisture
calculation.
TEMP
%H
2
0
To Next Page
Loading...