Weight
17
4. Press and hold ~L
AUTO H. CAL
5.Press 0 and press and hold
P until analyzer bleeps. I ° I
- 1= 11
11
6, Add a 180 gram sample to the cell.
Press 1 and press and hold P 1 until analyzer
bleeps.
2J
21
This completes the resetting of the weight balance only. Switch
analyzer off and on, reload the 180 gram sample and and check
the ib/bu reading to ensure it is 64.5 ±1 kg/hl. kg/hi
VI:2 CHANGING DEFAULT SETTINGS
The following options are available:
a) Hectolitre or bushel weight readings.
b) Temperature - °C or °F.
C) Baud rate setting of 300 or 4800.
d) High or low frequency moisture measurement.
The procedure to change from one default setting to the other
is as follows:
Display Shows
1. Switch on. — HI —
2. Press and hold ~ CAL.
AUTO
3. Enter password and press P P
To Next Page
Loading...