Set fan speed
Send signal
Turbo mode
8
ć
heating function
Set temperature
Set time
X-FAN function
TIMER ON/TIMER OFF
Child lock
Up & down swing
Left & right swing
Light
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel
Healthy mode
Scavenging functions
Quiet
WiFi
This is a general remote controller.Some
models have this function while some
do not. Please refer to the actual models.
{
6
3
7
9
11
13
15
12
14
16
10
8
5
4
2
1
1 ON/OFF button
2 MODE button
3 FAN button
4 TURBO button
6 button
7 button
9 I FEEL button
14 LIGHT button
15 button
16 TEMP button
11 CLOCK button
12 QUIET button
13
WiFi button
10 TIMER ON / TIMER OFF button
8 SLEEP button
5 ▲/ button
▲
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the
model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status.
After putting through the power, the air conditioner will give out a sound. Operation indicator " " is ON (red indicator,the colour is
different for different models). After that, you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a “di” sound, which means the signal has been sent to the air conditioner.
temperature under auto mode, the set temperature under auto mode may be invalid, or the displayed set temperature on the unit