Installation
Instructions for installation
and use of this product are
provided by the
manufacturer.
Select a location that is out
of reach of children and
away from animals and
plants. If necessary for
safety reasons, erect a
fence around the unit.
The indoor unit should be
installed close to the wall.
Do not use an unsuitable
power cord.
If the length of the power
connection cable is not
sufficient, ask your supplier
for a new cable of sufficient
length. The equipment must
be positioned so that its
electrical plug is easily
accessible.
If the air conditioner is
connected via a plug, the
plug should be easily
accessible after installation.
For an air conditioner
without a plug, a switch
(disconnector) or circuit
breaker must be connected
in the circuit.
The green+yellow wire in
the air conditioner is a
ground wire that must not
be used for other purposes.
The air conditioner is a
Class I electrical device. It
must be properly grounded
according to the applicable
standards. The earthing
connection must be made
by a qualified professional.
Make sure to check the
functionality of the earthing
at all times, otherwise
electric shock may occur.
The temperature in the
cooling circuit may be high.
Route the connecting cable
at a sufficient distance from
the refrigerant tubes.
To Next Page
Loading...
