Maintenance
5-18
5
4 A persistent Notification 401, 601 error code may be caused by an insufficient space between the nozzle and the
bed, which causes the filament not to be correctly transferred.
In such a case, select the [Bed Height Adjustment] menu to adjust the height of the bed so that there is adequate
space between the nozzle and the bed.
※You can also cancel printing and re-execute
[Setting]–[Bed Leveling]
to set the correct space between the
nozzle and the bed.
5 After finishing the response to Notice 401, 601 press the [Resume] button to continue printing.
To Next Page
