Need help?Do you have a question about the Sindoh 3DWOX 2X and is the answer not in the manual?
General| Printing Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Extruder Type | Dual Extruder |
| Number of Nozzles | 2 |
| Nozzle Temperature | Up to 250°C |
| Bed Temperature | Up to 100°C |
| Camera | Yes |
| Connectivity | USB, Ethernet, Wi-Fi |
| Supported Materials | PLA, ABS |
| Software | 3DWOX Desktop |
| Power Requirements | 110-220V, 50-60Hz |
| Build Volume | 228 x 200 x 300 mm (9 x 7.9 x 11.8 in) |
| Display | 5-inch Touchscreen LCD |
To Next Page
