4. Replenishing Consumables
4.1 Bed Replacement
Removing Flexible Bed
Reference
-
Please refer to P. 4-2 “1.1 Detaching Printed Output”.
Installing Flexible Bed
Reference
-
Please refer to P. 4-2 “1.1 Detaching Printed Output”.
Note
-
Small Scratches on the bed made during normal usage will not affect the print quality but if the bed sheet
is ripped off or contaminated, the printed output may not adhere on the bed properly and should consider
exchanging the bed to a new one.
-
Bed sheet is a consumable.
-
Please replace the bed sheet if models don’t get attached to it due to a significant scratch or defected parts
of the bed.
4.2 Filter Replacement
Caution
-
Turn the machine power off before starting the replacement.
Note
-
It is recommended to exchange filter and nozzle together.
-
Depending on environment, replacement interval may differ. If you smell odor from the filter, please
replace the filter.
1 Remove the bolts by using the plus screwdriver to fix the extruder cover.
To Next Page
Loading...
