Sindoh 3DWOX 2X - Dual Filament Printing; Changing Filaments

3-9
Printing
3
3 You may click the list to look at the information of the print job and delete it if necessary.
1.4 Printing with Two Types of Filaments
1 Two nozzles can cross print the same material.
- PLA and PLA
- ABS and ABS
- FLEX and FLEX
2 Two nozzles can cross print the same material.
- PLA and PVA
PLA ABS FLEX PVA
PLA O X X O
ABS X O X X
FLEX X X O X
PVA O X X X
1.5 Changing Filaments
To prevent clogging of the nozzle when switching from the used filament to different material filament, you must
perform Nozzle Cleaning.