Need help?Do you have a question about the Sindoh 3DWOX 7X and is the answer not in the manual?
Critical safety instructions to avoid severe injury, death, or property damage.
Critical safety guidelines for operating the machine.
Technical details on printing, temperature, speed, machine dimensions, and software.
Steps for device connection and software installation.
Detailed breakdown of all functions available in the UI menu.
Configuration options for extruder, bed leveling, nozzle control, and more.
Steps for printing using USB flash drives, PCs, or cloud services.
List of error codes and their corresponding solutions.
General| Filament Diameter | 1.75 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Print Technology | Fused Filament Fabrication (FFF) |
| Nozzle Temperature | Up to 300°C |
| Print Speed | Up to 200 mm/s |
| Connectivity | USB, Ethernet, Wi-Fi |
| Supported Materials | PLA, ABS, PETG, Metal, Wood |
| Display | 5-inch Touch Screen |
| Power Requirements | 100-240V, 50/60Hz |
| Build Volume | 380 x 390 x 450 mm |
To Next Page
